Skip to content
ARTMİMhotel design group TR

Quality made,every detail given its due.

Fixed, loose and upholstered furniture is produced for guest rooms and public areas. Wardrobes, counters, banquettes and seating groups are made with project-specific dimensions and materials, from polyurethane filling to upholstery.

Hotel Furnitureand Upholstery

Every armchair leaves the workshop at its drawn dimensions.

In a hotel room, the opening of the wardrobe, the size of the luggage rack and the relationship of the headboard to other fittings affect the ergonomics of the space. In public areas, seating layout, service circulation and access for cleaning come to the fore. Bespoke production allows these needs to be assessed together with the dimensions and conditions of use of the space. At ARTMİM, hotel furniture is made in our two factories in Antalya: panels and fixed furniture, and part of the loose timber work, at our main factory that opened in 2013; the frames, polyurethane filling and upholstery of loose products such as armchairs, chairs and side tables at our loose furniture factory.

Scope ofthe service.

Fixed furniture

Fixed furniture

Wardrobes, headboards, counters, storage and wall-mounted elements are resolved as part of the surface they sit on. Relationships with skirting, sockets, lighting and other fittings must be determined before production. Matching site measurements to the approved drawing helps prevent gaps and alignment problems at installation. Wardrobe, headboard and counter bodies are cut and drilled to the drawing dimensions on machining centres at our panel-processing plant, faced in presses, levelled on a wide-belt sander and have their edges closed on the edge-banding line.

Loose and upholstered products

Loose and upholstered products

For armchairs, chairs and other freestanding products, seating ergonomics, dimensions and the need to move them matter as much as form. Fabric, filling, frame and stitching details are assessed as a whole. In heavily used spaces, the cleaning method and access for maintenance are issues to be addressed at the start of the product definition. In our loose furniture factory, frames are prepared on tenoning and milling machines in the woodworking workshop; the filling comes from our polyurethane workshop, and fabric cutting and stitching from our upholstery workshop. Every layer of an armchair, from frame to stitching, is checked under the same roof.

Material and joint details

Material and joint details

Products combining a timber surface, stone top and metal leg call for cross-disciplinary detail solutions. Material thicknesses, edge finishes and connections directly affect the look of the product. In projects where the same design is repeated across many rooms, a clear approved sample and product specification are especially important. In hotel projects where the same room is repeated hundreds of times, the approved sample piece becomes the reference for series production; dimensions, colour and finish are checked against it in every batch.

From fillingto form.

The polyurethane inside largely determines how a sofa feels to sit on, how well it keeps its form over time and how the fabric sits on it. For this reason we also produce the filling in our upholstery workshop, together with the furniture's design.

In our own moulds

In our own moulds

Seat, back and armrest fillings are brought to shape by pouring into moulds we have designed ourselves. Density and firmness are determined by where the furniture will be and how heavily it will be used; the thickness of the filling, edge rounding and fabric tension are assessed together.

Amorphous and organic forms

Amorphous and organic forms

Because we do not depend on ready-made foam forms, we can also produce armchairs with rounded lines, plump seating modules, poufs and sculptural seating elements. In hotel projects where the same form is repeated many times, consistency between pieces is maintained by the mould.

Comfort and technical requirements

Comfort and technical requirements

Seating feel, form and the look of the covering are approved from a sample or prototype. We obtain the fire resistance certificates required by the hotel specification on a project basis; because fabric cutting and stitching are also done in our own workshop, how the covering sits on the filling is adjusted together during production.

Projectstages.

01Product list and dimensions

Fixed and loose products, dimensions and quantities are determined for each space.

02Production details

Layout, relationships with fittings, materials and joints are assessed together with production drawings.

03Sample evaluation

Surface, upholstery and finish decisions are clarified on a product sample where necessary.

04Installation preparation

Packaging, placement and fixing needs of the products are addressed together with site conditions.

Sample project

Vakko Hotel

Istanbul, Türkiye · 2024

Frequentlyasked questions.

What is the difference between fixed and loose hotel furniture?

Fixed furniture covers elements tied to the space and fitted to measure; wardrobes and counters are examples. Loose furniture comprises products that can be used independently, such as armchairs, chairs and tables. The two groups have different sizing and installation needs.

Can furniture be produced to project-specific dimensions?

ARTMİM's furniture service covers fixed and loose production according to the needs of the interior. The feasibility of special dimensions is assessed together with the material, product detail, quantity and site measurements.

How are fabrics and surfaces chosen for hotel furniture?

Area of use, intensity of contact, cleaning method and design language should be considered together. If a technical performance is required, it should be checked against product documents; colour or an image alone does not give enough information about durability.

Which files should be prepared for a production quote?

The product list, quantities, dimensioned drawings or layout plans, material expectations and target schedule should be shared. Photographs of existing examples can explain the design direction; they do not replace a technical product specification on their own.

Can project-specific forms be produced?

Yes. Because we pour polyurethane in our own moulds, curved, organic and amorphous forms specific to the design can be produced. The size of the form, level of detail, quantity and place of use are needed for assessment. A single piece and a module repeated many times affect the production plan differently.

What should be considered in heavily used areas of a hotel?

In heavily used spaces such as lobbies, restaurants and children's areas, the filling's ability to keep its shape and the durability and cleanability of the covering come to the fore. If there are requirements such as fire performance, the technical documents of the foam and the covering should be reviewed together.