Skip to content
ARTMİMhotel design group TR

Made exactly asdesigned.

Bespoke metal furniture, accessories and architectural elements are produced for interiors. Brass, bronze and aluminium, as well as stainless steel and iron, are worked to the design's requirements for dimensions, surface and installation.

Metalwork

Metal stays as slim in the weld as it is in the drawing.

Fabrication drawings for metal elements define sections, welds, corner returns and fixing points. This information is assessed together with the surface treatment and installation sequence. In hotel projects where the same element is repeated many times, determining dimensions and finish characteristics from a sample supports consistency in production. Our metal workshop is inside our loose furniture factory: sheets are cut to the drawing dimensions on the cutting bench, bent on the press brake and welded; surfaces are prepared by grinding and polishing, then take their final form with PVD coating or electrostatic paint, again under the same roof.

Scope ofthe service.

Bespoke metal furniture and accessories

Bespoke metal furniture and accessories

Table legs, shelving systems, frames and decorative elements can be handled according to the project's dimensions. The way it is used, its points of contact and its relationship with other parts determine the element's detail. Even where a slender section is intended, connection and load-bearing needs must be resolved separately. We produce elements in stainless steel and iron above all, and in brass, bronze and aluminium, in our own workshop, from furniture legs to bar and shelving systems, from railings to architectural details. PVD coating and electrostatic painting are also done at our own facility; colour and surface quality are controlled without depending on outside parties.

Surface and colour decisions

Surface and colour decisions

The sheen, texture and tone of a metal surface are perceived together with the light of the space. The same colour description can give a different result in a different material or surface treatment. Choosing from a sample helps settle the finish decision; the cleaning method and intensity of contact should also be considered with the choice. Our polishing and grinding craftsmen finish the surface by comparing it with the approved sample, so that the same specification looks the same on every piece.

Joints and on-site installation

Joints and on-site installation

Metal elements can be fixed to a wall, a floor or another piece of furniture. The quality of the substrate, access for installation and the design of visible connections affect the installation. For elements joining timber and stone, tolerances and installation sequence should be coordinated; this can reduce the need for later intervention on finished surfaces. Because the timber and stone that the metal part will join also come out of our factories, connection points are resolved together at the production stage; our installation teams also work from the same drawing.

Projectstages.

01Defining products and dimensions

Use, dimensions, location and relationships with other materials are defined.

02Material selection

Metal type, surface expectation and required performance conditions are assessed together.

03Connection details

Decisions on corners, joints and fixings are carried into the fabrication details.

04Installation planning

The load-bearing surface on site, access and the sequence of complementary works are checked.

Sample project

Cennet & Acanthus Barut

Side, Antalya · 2016

Frequentlyasked questions.

What products does ARTMİM's metal production serve?

ARTMİM produces bespoke metal furniture and accessories for interiors; it works with stainless steel and iron as well as brass, bronze and aluminium, and carries out PVD coating and electrostatic painting at its own facility. The material, dimensions and installation scope of a specific product are assessed from the project details.

Can a metal product be specified from a reference photograph?

A photograph can convey a design direction; it does not definitively explain the type of material, sections, surface treatment or connection. For production, this information needs to be completed with drawings and samples.

Can metal be used together with timber or marble?

These materials can be addressed together in the same piece of furniture or interior detail. Weight, connections, contact surfaces and installation sequence must be resolved in coordination. That ARTMİM has these production disciplines in-house supports the assessment of shared details.

What information matters in a metal production quote?

A dimensioned drawing, quantity, place of use, material and surface expectation are the basic inputs. Fixing points, transport needs and site access also allow the quote to be prepared on installation conditions, not on appearance alone.